Designing for continuous commercial use: where competitive advantage is won or lost

In commercial and industrial markets, products rarely win on their specification sheet. They win on the value they deliver across years of continuous use: the uptime they protect, the service costs they avoid and the confidence they give the people who specify, install and operate them.

Most of that value is decided long before the first production run. A widely cited review of life cycle cost research found that more than 70% of a product’s total life cycle cost is committed at the early design stage. That makes product design for continuous commercial use as much a strategic exercise as an engineering one, and four shifts in the commercial equipment market are raising the stakes.

The downtime paradox: fewer failures, higher costs

Row of automatic ticket gates and ticket machines in a modern metro station, where every hour out of service affects thousands of passengers

A global study of the world’s largest manufacturers found that unplanned downtime now costs the 500 biggest companies around $1.4 trillion a year, equal to 11% of their revenue. That is up from $864 billion (8%) in 2019 to 2020. In heavy industry, the cost of an hour’s downtime rose by 319% between 2019 and 2023, against US inflation of 19% over the same period.

What gets discussed less is that this happened while failures became rarer. The same research found plants now average 25 downtime incidents per facility per month, down from 42 in 2019. Fewer failures, but each one costs far more. As Make UK’s Jim Davison put it when earlier research first showed the trend, “Goods cost more, so the value of those not made during downtime is greater.”

For anyone developing commercial equipment, the implication is significant. The value of every failure avoided has risen sharply, and customers know it. The same study found that nine in ten manufacturers now collect some form of machine health data. Your product’s failures are increasingly being measured, logged and fed back into procurement decisions, which is why reliability engineering for commercial hardware has to start at concept stage.

When customers buy outcomes, reliability becomes margin

The way commercial equipment is sold is changing too. In a global survey of 800 senior manufacturing leaders, 39% named servitisation as central to long-term growth, and 94% said new service models were already affecting their operations. Servitisation means delivering value through services such as outcomes-based contracts and tiered service models, rather than simply selling a product.

That shift moves the cost of failure. Under a break-fix model, an unreliable product generates service revenue. Under an uptime or outcomes-based contract, every call-out, spare part and hour of lost availability comes straight out of the manufacturer’s margin. Reliability and serviceability stop being engineering attributes and become the foundation of the business model.

This is where product strategy and service strategy need to be developed together. If you plan to sell uptime, the product has to be designed to deliver it: diagnostics that identify a fault before a technician travels, modules that can be swapped in a single visit, and wear parts predictable enough to price into a contract.

The skills gap is now a design requirement

Electric vehicle charging point connected to a white car, an example of public equipment that must be quick and safe to service

The same survey found that 98% of manufacturers report labour shortages and skills gaps. For commercial equipment, that has a direct design consequence. Products can no longer assume a highly experienced engineer will be on hand to service them.

Equipment that a less specialised technician can maintain safely, with standard tools and clear access, is worth more to a customer struggling to recruit. Design for maintenance is becoming a selling point in its own right, and one procurement teams can put a value on. An annual survey of UK and Irish procurement professionals found that delivering annualised cost savings is now the biggest pressure on maintenance, repair and operations (MRO) buyers, cited by 40% of respondents, up from 29% the year before. A product that reduces service time gives those buyers a savings story to take to their finance teams.

Durability is becoming regulated and scored

Regulation is moving the same way. The EU’s Ecodesign for Sustainable Products Regulation (ESPR) creates a framework for setting durability, reliability and repairability requirements for almost all physical products placed on the EU market. The detail arrives product by product through delegated acts. The Commission’s first working plan, adopted in April 2025, sets out the initial priority product groups alongside horizontal measures on repairability, including a repairability score. Few categories of professional equipment have specific requirements yet, but the direction of travel is clear.

In the UK, the Product Regulation and Metrology Act 2025 received Royal Assent on 21 July 2025. It is enabling legislation, so the detail will follow through secondary legislation, but it creates a route for the UK to align with EU product requirements where that is judged beneficial. For UK manufacturers selling into Europe, durability and repairability are moving from good practice towards measurable, comparable obligations.

Manufacturers who design for them now will be ahead when they become requirements. Involving compliance specialists early in a programme means the requirements that will apply are understood before the key design decisions are made, not after.

Four stakeholders, one competitive advantage

Every commercial product serves several customer personas, each judging it by a different measure. The buyer looks at total cost of ownership and uptime. The specifier needs evidence of performance and compliance, because their reputation rests on the choice. The installer or maintainer needs safe, fast access with standard tools. The operator needs a product that performs reliably, shift after shift.

These priorities pull against each other. A sealed enclosure extends service life but slows maintenance. A feature that helps the operator can add cost for everyone else. Most products in a category resolve these tensions in much the same way, which is why so many end up competing on price.

The opportunity sits where competitors have compromised. If every product in a category treats maintenance access as an afterthought, a design that makes servicing fast and safe becomes a genuine point of difference. A useful starting point is to map each stakeholder’s requirements and the points where they conflict, then look for the conflicts competitors have left unresolved. In our experience, that is usually where the strongest USP lies.

Proving the commercial case before tooling

A strong concept only creates value if it holds up in real-world use. Validate design decisions against the product’s actual duty cycle, using failure mode analysis, material selection for the loads and environment it will face, and iterative testing with results fed straight back into the design.

Small batch production then lets you place a controlled run in the field, gather real usage data and refine the design before committing to production tooling. It de-risks the most expensive decision in the programme and shortens the route to a product the market will back.

Turning insight into advantage

Rising downtime costs, service-led business models, skills shortages and tightening durability rules all point the same way: product design for continuous commercial use is now a commercial decision as much as a technical one. In commercial equipment, reliability and serviceability are becoming differentiators that buyers measure, contract on and increasingly see regulated. The manufacturers who design for that shift now will set the benchmark their competitors are measured against.

If you’re planning new commercial or industrial equipment, or an existing product isn’t delivering in the field, book a discovery call and we’ll happily talk it through.

Share this post:

You might also like…

Engineer configuring a wall-mounted Cygnus SN-Pro wireless fire alarm panel with a laptop

Designing for continuous commercial use: where competitive advantage is won or lost

Downtime costs are rising, service models are shifting and durability is being regulated. What it means for product design for continuous commercial use.
Designer reviewing a product CAD model across two monitors at a workstation

SDW x Bonham & Brook – a seamless ecosystem for innovation

Our strategic collaboration with leading R&D tax consultancy Bonham & Brook has been launched to create a fully integrated ecosystem for innovation.
Kristo Shivachev and Giles Hemmings shaking hands in the SDW office

Giles joins to lead electronics and software innovation

Chartered Engineer Giles Hemmings joins SDW as Non-Executive Director for electronics and software development, bringing 30 years of connected product experience.

Insight-driven design.
Evidence-led decision making.